software - Search Results
Articles About software
Articles are sorted by RELEVANCE. Sort by Date.
A key part of gear design software development is customer feedback. With the right feedback, you can get your software developer to work for you to provide the most relevant features possible.
Romax Technology, the gearbox, bearing and driveline engineering specialist, has launched a new design software package that will increase speed, quality, creativity and innovation when designing gearboxes and drivelines. Called Concept, the new product delivers on the Romax vision of streamlining the end-to-end, planning-to-manufacture process with open, easy to use software solutions. It has been developed in close collaboration with engineers in the largest ground vehicle, wind energy and industrial equipment companies around the globe.
The latest software for gear design, engineering and manufacturing.
Synopsis on the latest developments at several gear design software developers.
REANY is software for the evaluation of gears and splines that have been measured completely on all teeth. It is suited to both quality assessment and analyzing the causes for deviations. REANY is short for Reality Analysis.
Question: When we purchase our first CNC gear hobbing machine, what questions should we ask about the software? What do we need to know to correctly specify the system requirements?
New software from AGMA helps gear designers calculate geometry and ratings for all types of bevel gears.
There's no substitute for a good software package in gear manufacturing. It's a critical shop floor tool that provides practical engineering services that customers appreciate. When you're in the business of specifying and procuring high quality gears, the software needs to meet many objectives including the consideration of all tolerances of center distance, tooth thickness and tip diameters, root diameters, fillets, etc. It's also imperative that the software updates include the latest revisions to the gear standards being used in the industry.
It’s a brave, new hardware-software world out there. Players in the worldwide gear industry who don’t have plenty of both run the risk of becoming irrelevant—sooner than later.
Dontyne Systems, a U.K. company founded by Michael Fish and David Palmer, recently unveiled a new software program for its Gear Production Suite.
The aim of this article is to show a practical procedure for designing optimum helical gears. The optimization procedure is adapted to technical limitations, and it is focused on real-world cases. To emphasize the applicability of the procedure presented here, the most common optimization techniques are described. Afterwards, a description of some of the functions to be optimized is given, limiting parameters and restrictions are defined, and, finally, a graphic method is described.
MASTA 4.5.1 models complete transmissions and includes 3-D stress analysis.
New Software/Hardware updates for the months of January/February 1997.
Designing and manufacturing gears requires the skills of a mathematician, the knowledge of an engineer and the experience of a precision machinist. For good measure, you might even include the are of a magician, because the formulas and calculations involved in gear manufacturing are so obscure and the processes so little known that only members of an elite cadre of professionals can perform them.
In this paper, the potential for geometrical cutting simulations - via penetration calculation to analyze and predict tool wear as well as to prolong tool life - is shown by means of gear finish hobbing. Typical profile angle deviations that occur with increasing tool wear are discussed. Finally, an approach is presented here to attain improved profile accuracy over the whole tool life of the finishing hob.
Software updates for the gear industry. What's new and noteworthy in software applications in 2017?
So there is little chance that they need the same software to assist with their work. Gone are the days when companies wrote their own code and process engineers thumbed the same tattered reference book.
A programmable algorithm is developed to separate out the effect of eccentricity (radial runout) from elemental gear inspection date, namely, profile and lead data. This algorithm can be coded in gear inspection software to detect the existence, the magnitude and the orientation of the eccentricity without making a separate runout check. A real example shows this algorithm produces good results.
This paper demonstrates an application of the tooth interior fatigue fracture (TIFF) analysis method, as implemented in SMT's MASTA software, in which loaded tooth contact analysis (LTCA) results from a specialized 3-D contact model have been utilized to determine the load boundary conditions for analysis of tooth flank fracture (TFF).
Examining the history of software in mechanical engineering
Most gear cutting shops have shelves full of expensive tooling used in the past for cutting gears which are no longer in production. It is anticipated that these cutters will be used again in the future. While this may take place if the cutters are "standard," and the gears to be cut are "standard," most of the design work done today involves high pressure angle gears for strength, or designs for high contact ratio to reduce noise. The re-use of a cutter under these conditions requires a tedious mathematical analysis, which is no problem if a computer with the right software is available. This article describes a computerized graphical display which provides a quick analysis of the potential for the re-use of shaving cutters stored in a computer file.
A look at some of the software options available to help with lean scheduling in a job shop
The availability of technical software has grown rapidly in the last few years because of the proliferation of personal computers. It is rare to find an organization doing technical work that does not have some type of computer. For gear designers and manufacturers, proper use of the computer can mean the difference between meeting the competition or falling behind in today's business world. The right answers the first time are essential if cost-effective design and fabrication are to be realized. The computer is capable of optimizing a design by methods that are too laborious to undertake using hard calculations. As speeds continue to climb and more power per pound is required from gear systems, it no longer is possible to design "on the safe side" by using larger service factors. At high rotational speeds a larger gear set may well have less capacity because of dynamic effects. The gear engineer of today must consider the entire gear box or even the entire rotating system as his or her domain.
An update on the latest gear design software from several vendors, plus what gear design engineers can expect next.
Adaptation key to success for gear software developers.
Impact Technologies considers commercial version of software package.
FVA software offers simulation and calculation of transmission systems.
It's more important than ever to understand the full system your individual components are going into. Here's the latest in how software developers are helping you do that.
Software Providers Examine the Dynamic Behavior of Gear Noise.
The first edition of the international calculation method for micropitting—ISO TR 15144–1:2010—was just published last December. It is the first and only official, international calculation method established for dealing with micropitting. Years ago, AGMA published a method for the calculation of oil film thickness containing some comments about micropitting, and the German FVA published a calculation method based on intensive research results. The FVA and the AGMA methods are close to the ISO TR, but the calculation of micropitting safety factors is new.
How difficult is it to design a gear? It depends upon whom you ask.
Over the last 15 years, there has been significant growth in the number of transmission types as well as their complexity: manual, conventional automatic, dual clutch, automated manual, continuously variable, split power and pure EV transmissions.
A high number of wind turbine gearboxes do not meet their expected design life, despite meeting the design criteria of current bearing, gear and wind turbine industry standards and certifications.
VDI has created a data exchange format that allows for the electronic exchange of all geometric parameters for cylindrical gears.
Developed here is a new method to automatically find the optimal topological modification from the predetermined measurement grid points for bevel gears. Employing this method enables the duplication of any flank form of a bevel gear given by the measurement points and the creation of a 3-D model for CAM machining in a very short time. This method not only allows the user to model existing flank forms into 3-D models, but also can be applied for various other purposes, such as compensating for hardening distortions and manufacturing deviations which are very important issues but not yet solved in the practical milling process.
The complete Industry News section from the June 2020 issue of Gear Technology.
The aim of the study was to apply such a specialized tooth contact analysis method, well-used within the steel gear community, to a polymer gear application to assess what modifications need be made to these models for them to be applicable to polymer gears.
Multiple CAM initiatives at Snyder Industries are improving safety, quality and productivity for parts ranging from 50 to 5,000 lbs.
Gear engineers have long recognized the importance of considering system factors when analyzing a single pair of gears in mesh. These factors include important considerations such as load sharing in multi-mesh geartrains and bearing clearances, in addition to the effects of flexible components such as housings, gear blanks, shafts and carriers for planetary geartrains. However, in recent years, transmission systems have become increasingly complex—with higher numbers of gears and components—while the quality requirements and expectations in terms of durability, gear whine, rattle and efficiency have increased accordingly.
Applying "Dynamic Block Contours" allows the designer to predict gear quality at the earliest stage of the design process.
Light-weight construction and consideration of available resources result in gearbox designs with high load capacity and power density. At the same time, expectations for gear reliability are high. Additionally, there is a diversity of planetary gears for different applications.
In this issue of Gear Technology, we are focusing on using computers to their greatest advantage in gear design and manufacturing. In a sense, that's old news. It's a cliche to suggest that computers make our work life easier and more productive. No company that wishes to remain competitive in today's global manufacturing environment can afford to be without computers in all their manifestations. We need them in the office; we need them next to our desks in place of drafting boards; we need them on the shop floor.
How does one perform a contact analysis for worn gears? Our expert responds.
Romax Technology is automating the design iteration process to allow companies to be faster to market with the highest quality, most robust gear products.
Gear manufacturers are moving into an era that will see changes in both engineering practices and industry standards as new end-products evolve. Within the traditional automotive industry, carbon emission reduction legislation will drive the need for higher levels of efficiency and growth in electric and hybrid vehicles. Meanwhile, the fast growing market of wind turbines is already opening up a whole new area of potential for gearbox manufacturers, but this industry is one that will demand reliability, high levels of engineering excellence and precision manufacturing.
The machine element package by KISSsoft for the design and optimization of components like gears, shafts, bearings and others is now available in the new version 04/2010.
Profile corrections on gears are a commonly used method to reduce transmission error, contact shock, and scoring risk. There are different types of profile corrections. It is a known fact that the type of profile correction used will have a strong influence on the resulting transmission error. The degree of this influence may be determined by calculating tooth loading during mesh. The current method for this calculation is very complicated and time consuming; however, a new approach has been developed that could reduce the calculation time.
Tooth contact under load is an important verification of the real contact conditions of a gear pair and an important add-on to the strength calculation according to standards such as ISO, AGMA or DIN. The contact analysis simulates the meshing of the two flanks over the complete meshing cycle and is therefore able to consider individual modifications on the flank at each meshing position.
Many CAD (Computer Aided Design) systems have been developed and implemented to produce a superior quality design and to increase the design productivity in the gear industry. In general, it is true that a major portion of design tasks can be performed by CAD systems currently available. However, they can only address the computational aspects of gear design that typically require decision-making as well. In most industrial gear design practices, the initial design is the critical task that significantly effects the final results. However, the decisions about estimating or changing gear size parameters must be made by a gear design expert.
The complete and accurate solution t the contact problem of three-dimensional gears has been, for the past several decades, one of the more sought after, albeit elusive goals in the engineering community. Even the arrival on the scene in the mid-seventies of finite element techniques failed to produce the solution to any but the most simple gear contact problems.
It used to be that a shop with hustle and plenty of big, fast machines could thrive using a manual system. But no more. Today's economic environment requires more and more in the way of topnotch service and quick turnaround - which frequently means a completely integrated shop floor control system.
Gear design has long been a "black art." The gear shop's modern alchemists often have to solve problems with a combination of knowledge, experience and luck. In many cases, trial and error are the only effective way to design gears. While years of experience have produced standard gearsets that work well for most situations, today's requirements for quieter, more accurate and more durable gears often force manufacturers to look for alternative designs.
Arrow Gear Company of Downers Grove, IL, has implemented a computer system that fully integrates exchange between all of its computer applications. The ELIMS (Electronic Linkage of Information Management Systems) project has increased manufacturing productivity and reduced lead times.
You're already a veteran of the computer revolution. Only you and your controller know how much money you've spent and only your spouse knows how many sleepless nights you've had in the last ten years trying to carve out a place in the brave new world of computerized gear manufacturing. PC's, CNCs, CAD, CAM, DNC, SPC, CMM: You've got a whole bowl of alphabet soup out there on the shop floor. Overall these machines have lived up to their promises. Production time is down, quality is up. You have fewer scrapped parts and better, more efficient machine usage.
Information is the name of the game in the 90s. We need more of it; we need it faster; and we need it in infinitely manipulatable and user-friendly form. In many cases, getting it that way is still something of a Holy Grail, somewhere off on the distant horizon. But thanks to computer technology, bit by byte, we're getting there.
Computers are everywhere. It's gotten so that it's hard to find an employee who isn't using one in the course of his or her day - whether he be CEO or salesman, engineer or machinist. Everywhere you look, you find the familiar neutral-colored boxes and bright glowing screens. And despite the gear industry's traditional reluctance to embrace new technology, more and moe of what you find on those screens are gears.
A computational fluid dynamics (CFD) method is adapted, validated and applied to spinning gear systems with emphasis on predicting windage losses. Several spur gears and a disc are studied. The CFD simulations return good agreement with measured windage power loss.
In effect, this article continues a previous Gear Technology article, "Modeling Gears In Pro/Engineer," published in the January/February 1999 issue. The previous article discussed drawing involute gear teeth using a program built into the Pro/E software.
Welcome to our Software Bits page. Here we feature new software products for gear design, manufacturing and testing.
This article illustrates a structural analysis of asymmetrical teeth. This study was carried out because of the impossibility of applying traditional calculations to procedures involved in the specific case. In particular, software for the automatic generation of meshes was devised because existing software does not produce results suitable for the new geometrical model required. Having carried out the structural calculations, a comparative study of the stress fields of symmetrical and asymmetrical teeth was carried out. The structural advantages of the latter type of teeth emerged.
The hobbing and generation grinding production processes are complex due to tool geometry and kinematics. Expert knowledge and extensive testing are required for a clear attribution of cause to work piece deviations. A newly developed software tool now makes it possible to simulate the cutting procedure of the tool and superimpose systematic deviations on it. The performance of the simulation software is illustrated here with practical examples. The new simulation tool allows the user to accurately predict the effect of errors. With this knowledge, the user can design and operate optimal, robust gearing processes.
With growing markets in aerospace and energy technologies, measuring hob cutters used in gear cutting is becoming an essential requirement for workpieces and machine tools. Zoller, a provider of solutions for tool pre-setters, measuring and inspection machines and tool management software, has developed a new partnership with Ingersoll/Germany for shop floor checking of hob cutters by a combined hardware and software approach.
Gear metrology is a revolving door of software packages and system upgrades. It has to be in order to keep up with the productivity and development processes of the machines on the manufacturing floor. Temperature compensation, faster inspection times and improved software packages are just a few of the advancements currently in play as companies prepare for new opportunities in areas like alternative energy, automotive and aerospace/defense.
Machine tool companies are expanding capabilities to better accommodate the changing face of manufacturing. Customers want smaller-sized equipment to take up less valuable floor space, multifunctional machines that can handle a variety of operations and easy set-up changes that offer simplified operation and maintenance.
NVH — noise, vibration and harshness — is a key issue in the design and development of modern transmission and driveline systems.
Software Bits for January/February 2000.
Software Bits for January/February 1999.
ITAMCO develops gear-related apps for the iPhone and related devices.
Klingelnberg measuring centers eliminate trial-and-error with modern analysis tools.
Back around 2005-2010, the most exciting things that were happening in broaching had little to do with broaching. What was happening - and continues to evolve today - was the emergence of on-the-edge CNC, software and servo drive technology. Together, they practically transformed a metalworking process as old as water into a viable, alternative consideration for producing high-volume part runs.
New machining fluids for automotive, jaw boring rings, virtual machine simulation and coordinate measuring software are highlighted in the March/April 2018 issue of Gear Technology.
Grinding fluids from Norton|Saint-Gobain, digital micrometer from Mahr, grinding centers from Haas Multigrind, updated software from KISSsoft.
Exciting new machine, cutting tool and software technologies are compelling many manufacturers to take a fresh look at producing their larger gears on machining centers. They're faster than ever, more flexible, easy to operate, highly affordable - and for any type of gear.
A gear design optimization approach applied to reduce tooth contact temperature and noise excitation of a high-speed spur gear pair running without lubricant. Optimum gear design search was done using the Run Many Cases software program. Thirty-one of over 480,000 possible gear designs were considered, based on low contact temperature and low transmission error. The best gear design was selected considering its manufacturability.
The geometry of the bevel gear is quite complicated to describe mathematically, and much of the overall surface topology of the tooth flank is dependent on the machine settings and cutting method employed. AGMA 929-A06 — Calculation of Bevel Gear Top Land and Guidance on Cutter Edge Radius — lays out a practical approach for predicting the approximate top-land thicknesses at certain points of interest — regardless of the exact machine settings that will generate the tooth form. The points of interest that AGMA 929-A06 address consist of toe, mean, heel, and point of involute lengthwise curvature. The following method expands upon the concepts described in AGMA 929-A06 to allow the user to calculate not only the top-land thickness, but the more general case as well, i.e. — normal tooth thickness anywhere along the face and profile of the bevel gear tooth. This method does not rely on any additional machine settings; only basic geometry of the cutter, blank, and teeth are required to calculate fairly accurate tooth thicknesses. The tooth thicknesses are then transformed into a point cloud describing both the convex and concave flanks in a global, Cartesian coordinate system. These points can be utilized in any modern computer-aided design software package to assist in the generation of a 3D solid model; all pertinent tooth macrogeometry can be closely simulated using this technique. A case study will be presented evaluating the accuracy of the point cloud data compared to a physical part.
Contact fatigue and bending fatigue are two main failure modes of steel gears, while surface pitting and spalling are two common contact fatigue failures -- caused by alternating subsurface shear stresses from the contact load between two gear mates. And when a gear is in service under cyclic load, concentrated bending stresses exist at the root fillet -- the main driver of bending fatigue failures. Induction hardening is becoming an increasingly popular response to these problems, due to its process consistency, reduced energy consumption, clean environment and improved product quality -- but not without issues of its own (irregular residual stresses and bending fatigue). Thus a new approach is proposed here that flexibly controls the magnitude of residual stress in the regions of root fillet and tooth flank by pre-heating prior to induction hardening. Using an external spur gear made of AISI 4340 as an example, this new concept/process is demonstrated using finite element modeling and DANTE commercial software.
In this paper, two developed methods of tooth root load carrying capacity calculations for beveloid gears with parallel axes are presented, in part utilizing WZL software GearGenerator and ZaKo3D. One method calculates the tooth root load-carrying capacity in an FE-based approach. For the other, analytic formulas are employed to calculate the tooth root load-carrying capacity of beveloid gears. To conclude, both methods are applied to a test gear. The methods are compared both to each other and to other tests on beveloid gears with parallel axes in test bench trials.
The machine tool industry is as competitive as ever. New machine technologies, materials, coatings and software upgrades are changing the way gears are being manufactured. Companies like Gleason, Liebherr, Kapp/Niles and DMG/Mori Seiki spend plenty of time and resources on R&D to develop the best products for the gear market. More importantly, these companies engage with (and listen to) customer requests.
How the latest techniques and software enable faster spiral bevel and hypoid design and development.
Mitutoyo offers capable, affordable and flexible gear inspection option via coordinate measuring machines and gear inspection software.
IMTS exists primarily as a buy-and-sell North American venue for practically every conceivable technology used in manufacturing, and in that regard it has no equal. There you’ll find on display the latest and greatest technology, from hardware to software and everything in between. But anyone who has attended past shows is aware that IMTS is much more than that. Following is a rundown of "extracurricular" activities you’ll find waiting for your edification and enjoyment.
This paper presents approximate and accurate methods to generate solid models of involute cylindrical gears using Autodesk Inventor 3-D CAD software.
Using the DANTE software, a finite element simulation was developed and executed to study the response of a carburized 5120 steel helical gear to quenching in molten salt. The computer simulation included heat-up, carburization, transfer and immersion in a molten salt bath, quenching, and air cooling. The results of the simulation included carbon distribution of phases, dimensional change, hardness, and residual stress throughout the process. The predicted results were compared against measured results for hardness, dimensions and residual stress. The excellent agreement between predictions and measured values for this carburized 5120 steel gear provides a basis for assessing the various process parameters and their respective importance in the characteristics of not only these heat-treated parts, but of other compositions and shapes.
Question: We are interested in purchasing our first gear hobbing machine. What questions should we ask the manufacturer, and what do we need to know in order to correctly specify the CNC hardware and software system requirements?
Today, as part of filling a typical gear hobbing or shaping machine order, engineers are required to perform an SPC acceptance test. This SPC test, while it is contractually necessary for machine acceptance, is not a machine acceptance test. It is a process capability test. It is an acceptance of the machine, cutting tool, workholding fixture, and workpiece as integrated on the cutting machine, using a gear measuring machine, with its work arbor and evaluation software, to measure the acceptance elements of the workpiece.
When the term, “what you see is what you get” is applied in the computer industry, it means that users or customers are able to see their end results without the encumbrances of complicated software code that enables this function. Software works behind the scenes ultimately to produce transparency and the desired effects. In many ways, this concept should be extended to the relationships that exist between suppliers and buyers and even among internal company departments.
The development of a new gear strength computer program based upon the finite element method, provides a better way to calculate stresses in bevel and hypoid gear teeth. The program incorporates tooth surface geometry and axle deflection data to establish a direct relationship between fillet bending stress, subsurface shear stress, and applied gear torque. Using existing software links to other gear analysis programs allows the gear engineer to evaluate the strength performance of existing and new gear designs as a function of tooth contact pattern shape, position and axle deflection characteristics. This approach provides a better understanding of how gears react under load to subtle changes in the appearance of the no load tooth contact pattern.
Recent breakthroughs in profile grinding software are helping Anderson Precision Gears and others meet wind power’s insatiable appetite for faster production of large, high-quality gears.
New grinding machines, multi-tasking machines, gear software and tools for gear manufacturers.
Xspect Solutions Provides Wenzel Bridge-Type CMM Equipped with OpenDMIS Software for Basic Gear Measuring Capability with CMM Flexibility.
News Items About software
1 New Gear Measurement Software from Wilcox (January 28, 2004)
The PC-DMIS gear measuring software from Wilcox is designed for any CMM. The software is an alternative to dedicated gear measurement... Read News
2 Bryan Grinder Releases New Software (April 3, 2006)
Bryant? Grinder, a division of Vermont Machine Tool, released Revelations? software, a Microsoft Windows-based, CNC control software that... Read News
3 Dontyne Develops Convoloid Analysis Software (January 4, 2013)
Dontyne Systems has entered into an agreement with Genesis Partners to develop software for the tooth contact analysis of their Convoloid... Read News
4 Seeq R18 Visual Analytics Software Adds Ease-of-Use Features, Additional Interface Options (September 11, 2017)
Seeq Corporation announced the release of its latest version, Seeq R18. This is the seventh release of Seeq software in just the past 18 ... Read News
5 KISSsoft Software Introduces Options for Sizing Shaft Dimensions (June 20, 2017)
When defining dimensions for shafts, KISSsoft's software now provides options for sizing shaft dimensions with regard to strength, an... Read News
6 Mahr MarCom Professional 5.2 Metrology Software Connects up to 32 Instruments Wirelessly, 128 Wired (May 8, 2017)
Mahr Federal is now offering its MarCom Professional metrology software version 5.2 as a free download from Mahr's website. MarCom 5.... Read News
7 Kitagawa Digital Grip Force Analyzer Software Determines Workholding Gripping Force (November 25, 2016)
Kitagawa NorthTech, Inc. has introduced their new Digital Grip Force Analyzer software and kit (PC Version) for machine tool users and ma... Read News
8 DMG Mori GearMILL Software Will be Displayed at Gear Expo (September 17, 2015)
DMG Mori will demonstrate its gear milling portfolio with a focus on GearMILL software and various gear milling processes on multi-taskin... Read News
9 TDM Global Line Software Tailored to International Manufacturers With Global Production Sites (July 20, 2015)
TDM Systems recently announced it will launch its new software module, TDM Global Line. in early August. TDM Global Line is tailored to i... Read News
10 AKGears Unveils Latest Tooth Root Fillet Optimization Software (April 14, 2015)
AKGears recently introduced the only commercially available tooth root fillet optimization software that defines the tooth root fillet pr... Read News
11 GWJ Technology Upgrades eAssistant Software (January 28, 2015)
GWJ Technology GmbH, headquartered in Braunschweig, Germany, has upgraded its web-based calculation software eAssistant with three new mo... Read News
12 Siemens Releases NX Software in the Cloud (April 1, 2014)
Siemens' NX software, the company's flagship solution for integrated 3-D computer-aided design, manufacturing and engineering analysis (CAD/CAM/CAE), is now available... Read News
13 KISSsoft Offers Customized Software Options (March 13, 2014)
Simple and intuitive handling is the basis for comfortable and efficient work with a software. In KISSsoft, there are several possibilities... Read News
14 Siemens Awards Software Grant to Ohio College (February 20, 2014)
From its historic Norwood Motor Manufacturing Facility, Siemens recently announced a $66.8 million in-kind software grant to Cincinnati S... Read News
15 Zontec Updates Synergy Software (March 16, 2012)
Zontec Inc. the international developer of Statistical Process Control (SPC) software solutions, recently announced an update to its... Read News
16 Heidenhain Offers Metrology Software (August 24, 2012)
Heidenhain announces the latest version of their PC-based Quadra-Chek Metrology software providing advanced functionality for inspection ... Read News
17 GWJ Technology Celebrates 15 Years of eAssistant Software (June 27, 2018)
GWJ Technology GmbH from Braunschweig, Germany, is marking the 15th anniversary of its web-based calculation software eAssistant - the ... Read News
18 GWJ Updates GearEngineer Software (January 20, 2012)
GWJ Technology GmbH, headquartered in Braunschweig, Germany, recently introduced a new version of its GearEngineer software. The version ... Read News
19 Excel-Lent Software Now Available from Excel Gear (May 16, 2011)
Excel-Lent software from Excel Gear, Inc., determines optimum product parameters for various industries and is now on sale through the we... Read News
20 Excel Gear Launches Gear/Gearbox Optimization Software (October 21, 2010)
Excel-Lent gear/gearbox design and analysis software has been developed by Excel Gear, Inc. and written in Visual Basic.Net. This softwar... Read News
21 Alpha Gear's Newest Software Simplifies Selecting Gear Reducers (September 3, 2008)
The Cymex calculation software from alpha gear drives Inc. uses a database of company products and 6,000 motors from various manufacturer... Read News
22 Romax Provides Ford with Analysis Software (January 16, 2008)
The NVH and bearing analysis software from Romax Technology, Inc. has been designated as the principal engineering tool for predictive an... Read News
23 Dontyne Debuts GATES Software for its Gear Production Suite (November 9, 2007)
Dontyne Systems, a U.K. company founded by Michael Fish and David Palmer, recently unveiled a new software program for its Gear Productio... Read News
24 GEARCALC Software Officially Released (January 26, 2007)
GEARCALC, a software program for sizing and rating cylindrical gears, now offers demos for downloading. Three parts offer algorithms ... Read News
25 Mastercams Latest CNC Software Enhanced to Provide Multi-Axis Toolpaths (April 20, 2006)
The new Maintenance Release 2 (MR2) software from Mastercam introduces new capabilities including multi-axis toolpaths and Mastercam X a... Read News
26 UTS Updates Integrated Gear Software Line (March 14, 2006)
Universal Technical Systems released new upgrades to their integrated gear software product line. A range analysis tool offers "what-i... Read News
27 Marposs Newest Software Enables On-Machine Measuring (January 18, 2006)
The 3D Shape Inspector software for on-machine measurement application from Marposs is used with the companys touch probes and enab... Read News
28 New Software Feature from UTS (January 31, 2005)
The Player software for sharing Excel spreadsheets and mathematical models created in the 5.0 Solver Premium Edition is available from Un... Read News
29 Sandvik Coromant InvoMilling CAD/CAM Software Offers Additional Five-Axis Functionality (January 12, 2018)
Cutting tool and tooling system specialist Sandvik Coromant has extended the functionality of its InvoMilling software. Th... Read News
30 KISSsoft Expands Application Areas for Software Tools (May 27, 2020)
The KISSsoft calculation program and its KISSsys system add-on are applicable in a wide range of fields. The software is well known for i... Read News
31 GWJ Technology Releases Latest Version of GearEngineer Software (September 27, 2018)
GearEngineer is a software program designed for calculating the real 3D tooth form in addition to the dimensioning and load capacity of... Read News
32 Open Mind Introduces Latest Version of Hypermill Software (February 17, 2020)
Open Mind Technologies AG has introduced Hypermill 2020.1, a new version of its advanced, comprehensive CAD/CAM software suite. In additi... Read News
33 Hexagon Offers Software Solution to Optimize CMM Performance (December 23, 2019)
Hexagon’s Manufacturing Intelligence division recently launched HxGN SFx | Asset Management, a cloud-ready software solution that h... Read News
34 Siemens Adds Augmented Reality to Solid Edge 2020 Software (June 13, 2019)
Siemens Digital Industries Software announces the availability of the latest version of Solid Edge software, which features numerous enha... Read News
35 Siemens Digital Industries Releases Latest Version of Parasolid Software (January 3, 2020)
The latest version of Parasolid software is now available from Siemens Digital Industries Software. The updates to Parasolid include enha... Read News
36 AAT and DMG MORI USA Announce Partnership for On-Machine Measuring Software (March 12, 2019)
Applied Automation Technologies, Inc. (AAT) and DMG MORI USA recently announced a partnership for on-machine measuring software.AAT and D... Read News
37 GWJ Expands Latest Version of System Calculation Software (February 22, 2019)
GWJ Technology, Germany, a manufacturer and provider of calculation software for mechanical engineering and gear manufacturing, recently ... Read News
38 FVA Offers Latest Workbench Software Update (December 9, 2019)
With the new version of the software, mass calculations can now be performed in 50% less time and - thanks to new FEA features - models c... Read News
39 Marposs Introduces New Probing Software (February 5, 2020)
Marposs introduces the CNC Probing Recorder software package—an automatic measurement, report and process control acquisition syste... Read News
40 Hexagon Optimizes CMM Performance with Asset Management Software (January 23, 2020)
Hexagon’s Manufacturing Intelligence division recently launched HxGN SFx | Asset Management, a cloud-ready software solution that h... Read News
41 Buehler Offers DiaMet Hardness Software Upgrade for Legacy Hardness Testers (December 21, 2018)
Buehler, an ITW company has announced that the DiaMet hardness software upgrade is now available for legacy Wilson testers. The DiaMet Ha... Read News
42 KISSsoft Offers Individual Design Elements in Software Packages (November 16, 2018)
KISSsoft's modular software includes international calculation standards, as well as a multitude of sizing and optimization options f... Read News
43 Kapp Niles Acquires Metrotek GmbH Software Rights for Specific Machines (April 8, 2020)
Kapp Niles Metrology GmbH has acquired rights to use Metrotek's software. The employees at the Karlsruhe location were successfully i... Read News
44 KISSsoft Offers Software to Students (April 1, 2020)
Nowadays, engineering studies should include the use of modern relevant software. For mechanical engineering students, these are mainly C... Read News
45 MESYS Offers Latest Version of Shaft and Bearing Calculation Software (July 24, 2019)
A new version of the MESYS shaft and bearing calculation software (Version 07/2019) is available and provides several new features. An ad... Read News
46 LK Metrology Launches Latest Version of CAMIO CMM Software (December 3, 2018)
Metrology software has challenges in most application environments—and LK Metrology’s new 8.5 version of their CAMIO CMM soft... Read News
47 Siemens Mindsphere Named IoT Software Leader (February 7, 2020)
The Industrial Internet of Things (IIoT) has the potential to significantly improve global productivity and growth, with Accenture esti... Read News
48 Interface Available From KISSsys to MSC.Software (October 25, 2011)
For users of KISSsys and MSC.Software there is now an interface available in order to import KISSsys models directly into MSC. Herewith t... Read News
49 KISSsoft Announces Software Updates (May 10, 2012)
There are numerous new features implemented for KISSsoft 03/2012. Highlights include: The contact analysis was improved with a new m... Read News
50 Kistler Introduces Injection Molding Software (April 6, 2012)
Kistler North America, a worldwide supplier of precision sensors, systems and instrumentation for the dynamic measurement of pressure, fo... Read News
51 Schott Systeme Streamlines Gear Design Software (April 15, 2006)
Schotte Systeme published a new video outlining how one single universal function has been designed to consolidate both 2D and 3D move... Read News
52 United Gear Utilizes Cost Estimating Software (March 7, 2012)
United Gear & Assembly, Inc. produces rather specific and complex parts, yet serves a wide-range of industr... Read News
53 KISSsoft Releases Beta Version of Software (March 1, 2012)
The KISSsoft 03/2012 Beta Version has now been released for a test run. The final release will be available fon April 23rd, 2012 - ... Read News
54 Starrett Provides Software Solutions for Force and Material Testing (December 26, 2019)
The L.S. Starrett Co., a leading global manufacturer of precision hand tool gages, a broad range of force testing, metrology equipment, a... Read News
55 Full Version of FVA-Workbench Software Available Free of Charge (April 3, 2020)
This is an unprecedented situation. Travel restrictions and working from home shape our daily routine. The length and impact of the pande... Read News
56 KISSsoft and Geartech Jointly Develop New Software Program (January 19, 2006)
KISSsoft AG and GEARTECH Software are pleased to announce the introduction of a new and updated version of GEARCALC, a gear design pro... Read News
57 New Multi-Axis Machining Software from NCCS (April 6, 2006)
NCCS announces the new release of the latest version of NCL 9.5 that improves productivity by reducing both programming time and cycle ti... Read News
58 KISSsoft Software Tested at TC60/WG15 Meeting (November 23, 2010)
A recent meeting of the workgroup TC60/WG15 took place considering the ISO Technical Report ISO TR 15144-the calculation of risk regardin... Read News
59 KISSsoft Offers Multiple Solutions for Gearbox Software (January 22, 2020)
Whether a gearbox is to be produced in-house or outsourced is still a central question for many companies. To make the right and quick de... Read News
60 NUMs Graphical and Conversational Software Compatible with Gear Manufacturing (April 11, 2006)
NUMs control systems will be displayed at IMTS and are suitable for use in gear manufacturing. The embedded machining cycles for ge... Read News
61 Software Update Includes Calculation Method for Scuffing (June 18, 2010)
In the release 04/2010, the calculation of flash and integral temperature according to ISO/TR 13989-1 and 13989-2 is available. With... Read News
62 Delcam Launching Next-Gen Software Version at IMTS (June 9, 2010)
Delcam will launch the 2011 version of its FeatureCAM CAM system at the IMTS exhibition in Chicago. The release will incorporate a more m... Read News
63 Verisurf Offers Free Metrology Training Courses and Software (April 3, 2020)
Verisurf Software is offering its comprehensive online metrology training courses FREE of charge. Now through June 30, you can access Ver... Read News
64 ABI Research Names Siemens a Leader in Manufacturing Simulation Software (February 27, 2020)
Industry experts at ABI Research, a global tech market advisory firm, recently named Siemens a leader in manufacturing simulation softwar... Read News
65 GL Certifies Software for RomaxWIND (October 11, 2010)
Romax Technology Limited's virtual development platform, RomaxWIND, has been officially certified by GL Renewables Certification (GL)... Read News
66 Okuma Discusses Advances in Software Media (February 6, 2013)
Do you remember using paper tape with your CNC control? If you’ve been in the machine tool industry for a while, you may remember t... Read News
67 Zoller Releases Collision Software Module (December 3, 2012)
Is there a user out there that has never experienced the following situation? Programmed nominal data does not comply with real, actual d... Read News
68 Ricardo Software Ignite Vehicle System Simulator Incorporates Modelon's Optimica Compiler Toolkit (May 3, 2016)
Ricardo Software recently announced a key partnership that will deliver immediate benefits to users of its Ignite complete vehicle system... Read News
69 Siemens Releases Latest Version of PLM Software (June 8, 2018)
Siemens announces the latest version of the Teamcenter portfolio, the world’s most widely used product lifecycle management (PLM)... Read News
70 TDM Systems Shopfloor Manager Software Module Follows Tool Circulation from Start to Finish (February 14, 2018)
TDM Systems, a subsidiary of Sandvik Machining Solutions has announced the introduction of TDM Shopfloor Manager in the TDM 2017 Global L... Read News
71 SMT Hosts MASTA Software Overview Webinar (January 29, 2018)
SMT recently announced the company will be hosting its first live and interactive MASTA webinar on January 30th at 1 pm (GMT). This first... Read News
72 Marposs Expands Software Capability with Blulink Acquisition (October 9, 2018)
Marposs has announced the acquisition of Blulink (Reggio Emilia, Italy), a company specializing in quality control and process management... Read News
73 KISSsoft and Gleason Offer Two Software Solutions, One Design Interface (November 13, 2017)
KISSsys is KISSsoft‘s system add-on that enables you to model complete gear units and drive trains. KISSsoft calculates the service... Read News
74 Third Wave Systems AdvantEdge Software Expanded to Include Gear Machining (July 11, 2017)
Third Wave Systems has successfully developed and simulated the complex processes involved in spiral bevel gear machining. With this Adva... Read News
75 Third Wave Systems AdvantEdge Software Offers Process Kinematics for Cylindrical Hobbing (March 10, 2017)
Third Wave Systems has released the new AdvantEdge Gear Machining v1.0. As part of the new release, the first version will include cylind... Read News
76 Modelon and Siemens PLM Software Enhance System Simulation Capabilities Through Partnership (January 10, 2019)
Siemens PLM Software and Modelon recently announced a partnership to use Modelon’s OPTIMICA Compiler Toolkit as the default Model... Read News
77 ANCA RoboTeach Software Decreases Teaching Time for the Fanuc 200iD Robot (November 23, 2016)
ANCA's new RoboTeach solution enables greater efficiency and accuracy when setting up robot automation on their CNC grinding machines... Read News
78 Mitutoyo Report Scheduler Standard Edition Added to the MeasurLink Software Suite (November 21, 2016)
Mitutoyo has announced the release of Report Scheduler Standard Edition, a product available in the MeasurLink suite of applications. Usi... Read News
79 Ipsen Shows Off PdMetrics Predictive Software at FNA 2016 (October 28, 2016)
Last week at Furnaces North America (FNA) 2016, Ipsen provided an in-depth look at their latest technologies and advancements. They also ... Read News
80 SKF and SMT Collaborate on Software for Transmission Systems (April 24, 2020)
By combining SKF and SMT’s technical analysis and optimization capabilities, engineers can now have a seamless experience when desi... Read News
81 KISSsoft Welcomes MSC Software as Technology Partner (February 1, 2013)
KISSsoft recently announced that it will be MSC Software's first Technology Partner with a connection to the new Adams/Machinery prod... Read News
82 KISSsoft Unveils Latest Software at Hannover Messe (April 17, 2015)
KISSsoft recently introduced its new version of KISSsoft 03/2015 at Hannover Messe on April 13. The new version was released with a ... Read News
83 Hexagon to Host Second Annual Production Software Users' Group Meeting at HxGN Live (April 9, 2019)
Hexagon’s Manufacturing Intelligence recently announced it will host the second annual Production Software Users’ Group meeti... Read News
84 Meghan Summers-West Named President of CNC Software (April 10, 2015)
Meghan Summers-West was recently appointed president of CNC Software, Inc., the developer of Mastercam CAD/CAM programming... Read News
85 Hexagon to Host MSC Software Global User's Conference during HxGN Live (May 2, 2019)
Hexagon’s Manufacturing Intelligence division has announced the 2019 MSC Software Global User’s Conference will be held at Hx... Read News
86 KISSsoft Releases New Version of Software (April 7, 2014)
On April 7th, the industrial fair in Hanover opens its doors. At the same time, the new version of KISSsoft 03/2014 will be released with a number of innovations that have been implemented... Read News
87 KISSsoft Adds LEHVOSS Material Data to 2019 Software Release (May 9, 2019)
More than 55 plastics are available for the gear design of KISSsoft. The material database of KISSsoft has been extended by additional pl... Read News
88 Gleason and SMT Introduce Complete Design and Analysis Software (March 17, 2014)
Gleason Corporation and Smart Manufacturing Technology Ltd. have announced the release of the first phase of their strategic global partnership... Read News
89 Octans Aircraft Collaborates with Siemens Digital Industries Software (June 20, 2019)
Having more security, reliability and availability of its products has led Octans Aircraft, a Brazilian manufacturer of small aircraft, t... Read News
90 Siemens Enhances PLM Software (September 11, 2013)
Siemens recently introduced a new series of industry-specific offerings at its annual PLM Software Analyst Conference in Boston. The Indu... Read News
91 KISSsoft Releases Latest Software Update (April 16, 2013)
KISSsoft is a modular calculation system for the verification, optimization, and sizing, of machine elements. The scope of the applicatio... Read News
92 KISSsoft Releases Software Beta (February 11, 2013)
The KISSsoft 03/2013 Beta Version has now been released for a test run. The final release will be available from April 8th, 2013 - just i... Read News
93 Hexagon to Hold MSC Software Conference during HxGN Live (June 8, 2018)
The 2018 MSC Software Global Users' Conference will be held at HxGN LIVE, Hexagon's premier cross-industry technology conferenc... Read News
94 ITAMCO Connects Forklifts to Industrial Internet of Things via Sensors and Software (February 1, 2016)
Forklifts, the workhorses of the plant floor, are more valuable than ever at ITAMCO. The company has connected their forklifts to the Ind... Read News